Sail-3.1.0-128

From sailpbx
Revision as of 08:16, 18 August 2011 by Adminwiki (talk | contribs) (New page: ===General=== * "insecure=very" removed/replaced with "insecure=port,invite" across the starter database. Existing users should check for insecure=very in their existing definitions (tru...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

General

  • "insecure=very" removed/replaced with "insecure=port,invite" across the starter database. Existing users should check for insecure=very in their existing definitions (trunk and extension) and change them manually.
  • G722 is now the highest level CODEC if Asterisk 1.8 is detected. Most modern phone equipment will support G722. If not, the fallback is G711.

Global default changes

N.B. these defaults will only apply to new installs. Existing system will be unchanged.

  • country code: uk for the SME8A1831128.iso and us for the sark-3.1.0-128 rpm
  • create extension ACLs: now defaults to no (N.B. - you should set this to yes if you do not have OSSEC or Fail2ban installed).
  • dynamic proxy enable: now defaults to yes
  • class of service: now defaults to on
  • default ring time (seconds): now defaults to 20
  • max outbound voip calls: now defaults to 10