SARK V4.0.0 s200IP Reset

From sailpbx
Revision as of 17:38, 8 January 2015 by Adminwiki (talk | contribs) (Preparing a SARK reset USB stick)
Jump to: navigation, search

Up a level

Sometimes it is necessary to reset an S200 back to its default IP setting (DHCP) or to reset the system passwords to default. From release 4.0.0-127 this can be done using a USB stick as follows;

Preparing a SARK reset USB stick

  • Use a disk manager (e.g. FDISK) to label a USB stick as S200UTILS
  • Create a folder in the root of the USB stick and call it "SARK"
  • Create a file in the SARK folder called "MAC"
    • The file should contain a single line with the mac address of the SARK in uppercase. Like this
F0:AD:4E:01:4B:C9

This MAC address MUST correspond with the mac address of eth0 network port of the SARK box you wish to unlock.

  • To reset the network to DHCP add an empty file in the SARK folder called RESETDHCP
  • To reset the passwords to default add an empty file in the SARK folder called RESETPASS

Running the USB stick reset

  • Power up the SARK and wait a few minutes to allow it to come up and settle.
  • Insert the USB stick into the USB port on the SARK
  • Wait a few seconds
  • The SARK will reboot
  • Wait a few minutes
  • Once the reboot has finsihed, remove the USB stick and insert it into a PC or laptop
  • There will be a file in the SARK folder called NETWORK which will show you the new IP address of your SARK box (if you reset it).