Beta V3R2

From sailpbx
Revision as of 08:11, 30 April 2012 by Adminwiki (talk | contribs) (Beta 3.2.x Major differences)
Jump to: navigation, search

Beta 3.2.x Quick Start notes.

SARK 3.2.0 is delivered as a series of Redhat RPMs ready to be installed onto an existing SME server 8.x; (i.e RHEL5 kernel releases beginning kernel-2.6.18-164.15.1.el5 or higher).
N.B. SAIL 3.2 should NOT be installed with any release of Asterisk prior to 1.4.30. The recommended major Asterisk release is 1.8

Beta 3.2.x Major differences

  • private web server (srk-httpd)
    • https
    • the web application is at 8443 (e.g. https://127.0.0.1:8443)
    • uses mod-perl
    • has its own authorization routines.
    • default user-id/password is admin asterisk (from 3.2.0.6 onwards)
  • AGI dynamic trace/debug (previously this was a compile option)
  • 'Runit' used on main services instead of init.d
    • srk-httpd
    • Responder (SIP broadcast listener)
    • Helper task (srkhelpd)
    • there are init.d wrappers for sark and srk-httpd so /etc/init.d still works
  • IVR extension listener
    • when turned on, the IVR DTMF processor will listen for extension dials as well as IVR options
  • True dynamic call queues
    • No more AgentCallBackLogin
    • GUI has not changed, you still add agents but no agents.conf is created
    • Supports agent pause/unpause (*63*/*64*) for Ast 1.6/1.8
    • Queuelog entries are the same format as before (for Qmetrics compatibility)
    • Still uses the local channel so call recording (including pause/resume) is the same
    • Works in Asterisk 1.4/1.6/1.8
  • New tenant & extension control features
    • set max number of outbound channels per tenant
    • set abstimeout per tenant or per extension
    • when abstimeout=0 the tenant/extension is barred from outbound calling
    • Sark will hangup any running calls for the tenant/extension when abstimeout goes to 0

Installation Sequence on SME Server 8.x

SARK UCS/MVP runs on a fork of Centos known as SME Server. You can download the SME Server distro from HERE
SME installation is straightforward and the SME wiki contains a full graphical walkthrough of a typical install HERE

Asterisk Installation

The Asterisk install notes can be found HERE - it is recomended that you install Asterisk 1.8

SAIL V3R2 Installation

This is broadly similar to a 3.1 install see HERE. However the RPMs are in a different library, they can be found here

http://sailpbx.com/sail/sail-3.2/